shop
Omni Adjustable Rigid Reamer Holders
$800.00
3 in stock (can be backordered)
The Omni Adjustable Rigid Reamer Holder is not a floating tool. It’s rigid; adjustable both radially in X and Y and angularly in all directions to remove any tilt or misalignment from collets or tool post to adjust the reamer dead true to the spindle. The Omni Adjustable Rigid Reamer Holders are made in the USA by Drews Precision in Bison, South Dakota.
Included is the indication jig to indicate the reamer to the spindle bore while it’s being held in the Omni Adjustable Rigid Reamer Holder. The two Interapid .0001/10th indicators (Shown in the instructions) are not included.
Advantages:
• Rigid stability prevents chatter.
• Micro adjustable in all planes to remove angular and radial run out for exact alignment.
• No side-load = no oversized chambers.
• Rigid means no droop = no scratches or galling.
• Repeatable, consistent results.
Bottom line: Eliminate runout in the barrel, align the reamer perfectly, and cut with zero flex. The Omni Adjustable Rigid Reamer Holder delivers chatter-free, concentric chambers.
The Omni Adjustable Rigid Reamer Holder was designed to be held by the carriage of a lathe, not the tail stock. The carriage is much more accurate than the tail stock. If you try
and use this in the tail stock, you will never be able to get it adjusted due to the tail stocks non-repeatability and sag that they are plagued with. If you do try this, you will find out why
you should not be using your tail stock to cut chambers.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
STAR RATING
ALL REVIEWS
Manson targets
CLICK HERE to download.
